MMCS Interface
|
MMCS Interface
|
|
|
Lancer Installation We have recently become aware of the following YouTube video illustrating the installation of our kit into a Lancer - click the link below to view
Wire Colour Confusion It is vital that the correct signal wire is located and used for the interface.. Some confusion has resulted due to similar colour signal wires. Remember the Signal wire is predominately white, with a thin blue strip (Except ASX - These are Light Brown with silver but is in the same location as all other models) - there is also silver specs on it.
The location of this wire (when looking at the back of the MMCS unit) - is the top right hand corner of the 20 pin Molex connector. |
|
Send mail to
gadgets@resourceit.com.au with
questions or comments about this web site.
|
